ER630 / 17-4PHMetal Powders & Printing Wire Materials
ER630 / 17-4PH
Precipitation Hardening Welding Wire
AWS A5.9 · 0.8-1.0 mm · UTS 900-1,000 MPa
A 17-4PH type wire for high-strength tooling and shaft repair. Tensile strength of 900-1,000 MPa after ageing, with hardness up to HRC 58-62 achievable through gradient build-up on tooling.
- Tensile strength of 900-1,000 MPa
- Hardness up to HRC 58-62 with gradient build-up
- Diameters of 0.8 and 1.0 mm
- Argon shielding gas
- Suited to tooling and shaft repair
TECHNICAL DATA
Specifications
- Wire grade
- ER630 / 17-4PH
- Standard
- AWS A5.9
- Diameter
- 0.8 / 1.0 mm
- Tensile strength
- 900-1,000 MPa
- Shielding gas
- Ar
- Typical use
- High-strength tooling and shaft repair
Specifications are subject to change without notice. Values marked as confirmed on quotation are finalised against the configured machine.
APPLICATIONS
Where it is used
- High-strength tooling repair
- Shaft reclamation
- Wear-resistant build-up
SCOPE OF DELIVERY
What is included
- 5 kg, 12.5 kg and 15 kg spools
- Batch certificate of analysis
- Precision layer-wound spools for long uninterrupted builds
SERVICE AND SUPPORT
After delivery
- Diameter tolerance of plus or minus 0.03 mm
- Bulk drums and custom diameters on request
- Drying and storage guidance supplied
Request specifications for ER630 / 17-4PH
Send your component data, material and destination port, and our technical team will return a configured quotation with the full datasheet.
Contact Our Team